LTC system
2-in-1 system for cable laying and route location
The LTC system not only allows you to track routes or locate pipe blockages in indoor installations, but you can also pull in cables.
Even in places where other pull tools have failed, the LTC system surmounts angular routes without problems, even in pipe systems with cables and over long distances.
The robust housing has a practical accessory space and a built-in replaceable slip ring for connecting common transmitter units.
Because there are no moving external parts attached to the LTS housing, no dust or dirt particles can gather here to impair the function or durability.
The crank integrated at the rear renders rewinding the 20- or 30-metre push cable mere child's play and the fibreglass-reinforced cable outlet with return stop prevents the cable from being accidentally reeled all the way into the housing.
Easily manages even narrower bends
The optimized rod end (1) of the LTC system increases the bending characteristics of the Polykat fibreglass profile at the transition between rod end and cable. In combination with the improved flexi-probe (2), the rod end not only reduces the risk of a rod breakage but also allows for yet smaller bending radii of up to 30 mm without a loss of thrust stability. The shortened brass insert – in connection with a high-performance plastic – ensures an optimized force transmission during insertion.
Also suited for locating routes
Copper conductors are built into the fibreglass cable of the locating systems, which, when connected to the transmitter, emit a locatable signal along the entire length of the cable. To do so, a transmitter cable is connected at the LTC and the second is grounded.
The illustration shows an ST-510 transmitter and an SR-24 receiver by way of example. The locating system allows the use of common transmitters and receivers in the 33 kHz range.
Special equipment features
All tracking systems in direct comparison:
To find the tracking system which exactly meets your requirements, please consult the concise overview of all tracking systems from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Two in one: used for cable laying work and locating routes
- Targeted detection and tracking of empty conduit courses or obstructions
- Locating can be carried out by just one person working alone
- Stable and flexible fibreglass push cable with a small bending radius
- Robust housing with fibreglass-reinforced cable outlet and integrated crank for rewinding the cable
- Slip ring for feeding the fibreglass cable even when the transmitter is connected
- The fibreglass cable can be repaired in the event of breakage – it is not necessary to replace the entire coil
Accessories contained in scope of delivery:
- One ø 7 mm and one ø 10 mm flexi-probe
- Five brass pulling heads with M5 thread (ø 6 mm) and eyelet
- One cable grip with swivel for ø 6 - 9 mm cables
- Three brass connection sleeves
- Two rod ends with external M5 thread
- One special fibreglass adhesive (3 g) for push cable repair
Additional accessories available on request.
standard equipment
optionally available
not available
LTC3020
/en_GB/3110005002/LTC3020-Positioning-System-20m-81454-1510227138.jpg)
LTC3020 Positioning System 20m
159.95 £ incl. VAT Show net price (VAT not included)
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 3.110.005.002 | |
| Pipe location | ||
| Maximum detection depth | Approx. 4 m (depending on the composition of the covering material) | |
| Frequency to be used | 33 kHz | |
| Ø push cable | 3 mm | |
| Ø probe head | 7-10 mm | |
| Push cable length | 20 m | |
| Interfaces | ||
| Banana plug socket(s) for the connection of transmission cables | ||
| Power supply | ||
| External (transmitting unit) | ||
| Housing design | ||
| Plastics | ||
| Metal | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 330 | |
| Width (packaging excluded) [mm] | 260 | |
| Height (packaging excluded) [mm] | 80 | |
| Weight | ||
| (packaging excluded) [kg] | 1.15 | |
| Standard scope of delivery | ||
|---|---|---|
| Standard scope of delivery | ||
| Operating manual | ||
| Pulling and pushing tool | ||
| Flexi-probe Ø 7 mm | ||
| Flexi-probe Ø 10 mm | ||
| Five brass pulling heads with M5 threads and eyelet | ||
| Cable pulling strap with swivel for cables spring guide head Ø 6 - 9 mm | ||
| Brass rod ends with M5 thread | ||
| Three brass connection sleeves | ||
| Special fibreglass adhesive | ||
| Ascertainable measured values and functions | ||
|---|---|---|
| External sensors | ||
| Passive emission of a detection frequency for pipe location | ||
| Functions and features | ||
| Optional application as cable installation system | ||
| With slip ring assembly | ||
| Route location option | ||
| Pinpoint location option | ||
| Brake precisely adjustable | ||
standard equipment
optionally available
not available
LTC3030
/en_GB/3110005011/LTC3030-Route-Locating-System-30m-66491-1507645990.jpg)
LTC3030 Route Locating System 30m
169.95 £ incl. VAT Show net price (VAT not included)
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 3.110.005.011 | |
| Pipe location | ||
| Maximum detection depth | Approx. 4 m (depending on the composition of the covering material) | |
| Frequency to be used | 33 kHz | |
| Ø push cable | 3 mm | |
| Ø probe head | 7-10 mm | |
| Push cable length | 30 m | |
| Interfaces | ||
| Banana plug socket(s) for the connection of transmission cables | ||
| Power supply | ||
| External (transmitting unit) | ||
| Housing design | ||
| Plastics | ||
| Metal | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 330 | |
| Width (packaging excluded) [mm] | 260 | |
| Height (packaging excluded) [mm] | 80 | |
| Weight | ||
| (packaging excluded) [kg] | 1.25 | |
| Standard scope of delivery | ||
|---|---|---|
| Standard scope of delivery | ||
| Operating manual | ||
| Pulling and pushing tool | ||
| Flexi-probe Ø 7 mm | ||
| Flexi-probe Ø 10 mm | ||
| Five brass pulling heads with M5 threads and eyelet | ||
| Cable pulling strap with swivel for cables spring guide head Ø 6 - 9 mm | ||
| Brass rod ends with M5 thread | ||
| Three brass connection sleeves | ||
| Special fibreglass adhesive | ||
| Ascertainable measured values and functions | ||
|---|---|---|
| External sensors | ||
| Passive emission of a detection frequency for pipe location | ||
| Functions and features | ||
| Route location option | ||
| Optional application as cable installation system | ||
| With slip ring assembly | ||
| Pinpoint location option | ||
| Brake precisely adjustable | ||
standard equipment
optionally available
not available